Escape from Tarkov, known for its intense realism and challenging quests, continually introduces new layers of complexity for its players. Among the many tasks added, the “The Walls Have Eyes” quest stands out, demanding both navigational skill and situational awareness on the infamous Factory map. This particular mission requires PMCs to stealthily place Wi-Fi cameras in three distinct crane cockpits, a task made challenging by Factory’s compact, high-action environment. While the map might seem small, the precise locations for these cameras can be tricky to locate under pressure, especially with other players lurking. This comprehensive guide will walk you through every necessary step to successfully complete “The Walls Have Eyes,” from understanding the objectives to pinpointing each camera placement and securing your valuable rewards.
Objectives for The Walls Have Eyes Quest
To successfully complete the “The Walls Have Eyes” quest, issued by the Skier, players must meticulously fulfill three primary objectives within the Factory raid. These tasks revolve around deploying surveillance equipment at elevated vantage points, specifically within the operational areas of three separate cranes on the map. Before initiating your raid, it is absolutely essential to acquire and bring three Wi-Fi Cameras into the Factory. Each camera is designated for one crane, meaning you’ll need one for each of the three distinct locations. Strategically placing these items in your secured container (Alpha, Beta, Gamma, Epsilon, or Kappa) is a wise precaution, as this prevents their loss if your PMC is eliminated during the attempt. This preparation is key to avoiding repeated runs for forgotten items and streamlines your progression through the quest.
- Plant the First Wi-Fi Camera: Securely deploy a camera within the cockpit of the first designated crane.
- Plant the Second Wi-Fi Camera: Position another camera inside the cockpit of the second specified crane.
- Plant the Third Wi-Fi Camera: Install the final camera within the cockpit of the third and last required crane.
Ensuring you have all three cameras from the outset significantly boosts your chances of one-shotting this mission.
Step-by-Step Location Guide for Camera Placement
First Crane Location
The first Wi-Fi Camera installation point is situated in a crane cockpit near the Gate 3 extraction point, specifically accessible from the upper levels of the office building. To reach this initial spot, begin by navigating to the third floor of the main office structure. Once you are on this floor, locate the overhead skybridge that connects different parts of the industrial area. Instead of crossing the skybridge entirely, observe its left side, where you can carefully transition onto the exposed rafters. Traverse these precarious beams until you are directly above or very close to the crane cockpit. From this position, you’ll need to execute a controlled drop into the cockpit area. Be deliberate with your movements to avoid falling off the map or past the target. Once inside the cockpit, initiate the planting action for your first Wi-Fi Camera. Exercise caution and avoid any extraneous key presses during the installation process, as this can interrupt the placement and require you to restart.
Second Crane Location
The second Wi-Fi Camera location requires you to shift your focus towards the opposite side of the Factory map, specifically near the Gate 0 extract. After successfully placing the first camera, make your way back to the top floor of the main office building. From here, you will once again utilize the network of rafters and structural elements. This time, navigate carefully across these elevated pathways, heading directly towards the Gate 0 side of the factory. Keep an eye out for another distinct crane cockpit; it’s typically tucked away in a corner or an alcove that offers a clear view of the ground below, close to the Gate 0 extraction route. Upon reaching this second crane, carefully enter its cockpit. Once inside, proceed to deploy your second Wi-Fi Camera. Confirm the installation prompt to ensure the camera is successfully placed and the objective registers as complete before moving on.
Third Crane Location
The final camera placement for “The Walls Have Eyes” is positioned above the medical camp area, which is readily accessible via the main skybridge from the office sector. To reach this crucial third spot, first cross the aforementioned skybridge that connects the central office building to the factory’s other sections. As soon as you emerge on the other side of the skybridge, make an immediate right turn. Continue along this elevated walkway until you approach its very end. Just before reaching the absolute terminal point of this path, you will clearly spot the third crane and its distinctive cockpit. This crane often overlooks a specific zone, making it a critical surveillance point. Carefully maneuver into the crane’s operational cabin. Once inside, interact to plant your third and final Wi-Fi Camera. Completing this last placement will trigger the objective completion, signaling your successful fulfillment of Skier’s request.
Tips for Completing “The Walls Have Eyes” Quest
Completing “The Walls Have Eyes” efficiently and safely requires strategic planning due to Factory’s high-intensity nature. Here are some key tips to boost your success rate:
- Bring All Three Wi-Fi Cameras: This is non-negotiable. Ensure all three cameras are in your secure container before entering the raid. Losing them means repeating the tedious process of acquiring new ones. Prioritize this step to avoid frustrating setbacks.
- Time Your Attempt Wisely: Factory is a small map, notorious for early-raid player-versus-player combat. It’s often beneficial to delay your camera placement until later in the raid. Waiting until some of the initial chaos has subsided, and other PMCs have either extracted or been eliminated, significantly reduces your risk of encountering immediate threats while vulnerable on the rafters or in a cockpit.
- Focus During Placement: The camera installation process can be sensitive. Avoid pressing any additional buttons or attempting other actions while the “Plant” animation is ongoing. Any accidental input can interrupt the sequence, forcing you to restart the planting process for that specific camera. Maintain a clear focus and allow the animation to finish uninterrupted.
- Listen and Observe: Factory is loud, but keen hearing can save your life. Listen for footsteps, gunshots, and voice lines. Before ascending to the crane positions, always check your immediate surroundings. Observe common player routes and extraction points to anticipate potential ambushes.
- Light Loadout: Consider a lighter, more agile loadout. While having some self-defense is crucial, being weighed down by heavy armor and weapons might hinder your movement on the rafters or make you an easier target. A fast, maneuverable build can allow for quicker repositioning and escapes.
By following these tips, you can significantly enhance your chances of safely installing all three cameras and completing the quest.
Rewards for Completing “The Walls Have Eyes” Quest
Successfully navigating the dangers of Factory and fulfilling Skier’s “The Walls Have Eyes” quest yields a collection of valuable rewards that significantly bolster your character’s progression and gear inventory. Upon completion, players are granted a substantial experience boost, earning 7,200 XP, which contributes directly to their overall PMC level and skill progression. Furthermore, your standing with the Fence, a critical trader, improves with a +0.02 reputation gain, unlocking better access to his services and potentially better trade offers. A significant financial payout is also part of the reward, with 550 Euros added to your stash. This currency reward can increase to 578 Euros or even 633 Euros if you have upgraded your Intelligence Center to level 2 or 3, respectively, highlighting the benefit of hideout development.
Beyond the numerical boosts, you receive tangible combat assets:
- 1x KRISS Vector .45 ACP SMG: A highly sought-after submachine gun known for its exceptional rate of fire and manageable recoil, making it devastating in close-quarters combat.
- 3x KRISS G30 30-round Magazine: Essential magazines to keep the Vector loaded and ready for extended engagements.
- 3x .45 ACP Lasermach FMJ 50-round Ammo Pack: A generous supply of reliable full metal jacket ammunition for your new Vector, ensuring you have enough rounds to make an impact in your next raids.
These rewards not only provide immediate utility in your Tarkov endeavors but also offer excellent resale value if you choose to liquidate them, contributing further to your in-game wealth.
Leave a Reply